Zum Hauptinhalt springen

Stepper Motor Control SMC 9300

The SMC 9300 is a programmable stand-alone stepper motor controller for simultaneous control of up to 18 motor axes.

The 19"-rack unit is equipped with an Intel embedded CPU, a 7" touch-screen user interface and operates under Windows Embedded Standard 7. The controller communicates via serial- or ethernet interface. Each axis provides home-, limit- and incremental encoder signal input. Please see table below for detailed specifications.

We build your individual motor controller which exactly meets you requirements. According to your specifications, individually equipped, without compromises, cost-efficient and quick.

Alternative system: SMC.IPC

  • 19" industrial PC for up to 48 axes,
    allows integration of additional data acquisition hardware

Technical Data:

Number of axes 1-18 (40)
CPU Intel Embedded
Operating system Windows Embedded Standard 7
User interface 7" colour TFT touch-sensitive display
Hard disk 2.5" SATA SSD
Communication interfaces Serial (RS232), Ethernet
Control signals Limits, Near-home, Home
Encoder input 3-channel differential (RS422, A/B/I)
Firmware update via Internet download
Online support TeamViewer Client
Dimensions 19" 3HU rack unit (450 x 300 x 132 mm)
Power supply 115/230VAC 50/60Hz (adjustable), 600VA max.
Weight approx. 12 kg (depending on configuration)
Environment conditions Storage: -10°C..+60°C, Operation: +10°C..+40°C, Rel. humidity: 15%...85%
Options 8 bit digital I/O, accessory control via USB, Ethernet or RS232, e.g. Heidenhain EIB7, iCHaus BiSS interface, Joystick.

Stepper Motor Controller SMC 9300 - Rear Panel

The picture below shows the rear panel of a SMC 9302, i.e. a control system for two stepper motor axes.
In this case the motor drivers are integrated to the control unit and separately switchable. The controller is equipped with both serial and network interfaces as standard.

The following options are also available:

  • Digital I/O-port (8 in, 8 out)
  • Control of filter- and half-screen device for crystallography application
  • TTL-counter input for scintillation counter tubes
  • Clock and direction outputs for external position monitor.